Wood and acrylic are two common materials used in laser cutting and engraving projects. However, sometimes you may find yourself in a situation where you need to remove masking from these materials, and it can be a bit of a challenge. Thankfully, black Gorilla tape can make this process much easier.
Masking is the process of covering a surface with a protective layer to prevent it from getting damaged during a project. Once the project is complete, the masking needs to be removed to reveal the surface underneath. This can be tricky with certain materials, especially if the masking has been on for an extended period of time.
One solution to this problem is to use black Gorilla tape. This strong and durable tape can help you remove masking from wood and acrylic without causing damage to the surface underneath. Here’s how to do it:
- Cut a piece of black Gorilla tape to the desired size. Make sure the tape is slightly larger than the area you want to remove masking from.
- Place the tape over the masking, making sure it adheres firmly to the surface. Smooth out any bubbles or wrinkles.
- Gently pull the tape back, pulling it away from the surface at a 45-degree angle. The adhesive on the tape will stick to the masking and lift it off the surface.
- Repeat this process as needed until all of the masking has been removed. If any residue remains, you can use a mild cleaner or rubbing alcohol to clean the surface.
It’s important to note that black Gorilla tape should only be used on surfaces that can withstand the adhesive strength of the tape. If you’re unsure, test a small area first to make sure it doesn’t cause any damage or leave behind residue.